Side Mount to be use with 10"+ MagTarget enclousres

Designed to mount MagTarget enclosures onto wall.

This is a service part for MagTarget lightening version fo PoE. FPC cable only.

The kit (3M adhesive coversheet) is designed to work with MagTarget glass mount.

The 15 degree bracket is used to have the enclosure tilt to 15 degree angel to the mounting surface.

The 0 degree bracket is used to have the enclosure sit parallel to the mounting surface.

Ethernet extender cable to be used with MagTarget products

Use these screws to secure the device onto a VESA mount.

The included nylon washers are to be used between the dock housing and VESA mount to provide clearance for the RJ45 extension cable.

Use these security screws to secure the device in place.
Note: the matching security bit is required to install/remove these screws.

The included nylon washers are to be used between the dock housing and VESA mount to provide clearance for the RJ45 extension cable.

Use this cable for audio export and control music from tablets as needed.

Use this security drive bit to install/remove M4 security screws sold by MagTarget.

Use this security drive bit to install/remove M3 security screws sold by MagTarget.

Use in combination with the 240VAC-TO-48VDC Wall Adapter (235-0018) to power the Industrial Magnetic Dock, when PoE is not available.

Use these security screws in place of the provided black screws to secure the device in place.
Note: the matching security bit is required to install/remove these screws.